To pause Roomba during a cleaning cycle, press CLEAN. » To resume the cleaning cycle, press CLEAN again. » To send Roomba back to the Home Base, press (Dock) • To end the cleaning cycle and put Roomba in standby mode, press and hold CLEAN until Roomba’s indicators turn off.
How do I send my Roomba back to the dock?
How to Send Roomba Home to Dock
- Verify that the home base is plugged in. If it’s not, your Roomba will be unable to locate it to dock. …
- Pick the Roomba up and set it down within five feet of the home base.
- Press the “Spot” and “Clean” buttons simultaneously. The Roomba will now drive into the home base to dock.
Why is my Roomba not returning to base?
If your Roomba won’t return home after a cleaning session or after you manually tell it to through the app or on the device itself, this is often due to it having trouble navigating back to the dock. Ensure that the Roomba has a clear path to the charging station with no wires or anything else in the way.
How do I send Roomba to home base app?
Open up the iRobot HOME app on your smartphone. Tap on the “Clean” button within the app—this will bring up the “Send Home” option. Tap this option on your phone to automatically send your Roomba back to its Home Base.
How do I make Roomba go to another room?
If you want to add areas to your Smart Map, run a Select All clean from the New Job button or a Mapping Run to allow your robot to access all the areas of the floor. After the job, your Clean Map will highlight “New Space Found.” Your Smart Map should also automatically update with the new space.
Where is the best place to put my Roomba dock?
- At least >1.5 ft (0.5 m>) on each side of the Home Base®.
- At least >4 ft (1.2 m>) in front of the Home Base®, with no furniture such as tables or chairs within this area.
- At least >4 ft (1.2 m>) between the Home Base® and any stairs.
- At least >8 ft (2.4 m>) from Virtual Wall® barriers.
How does Roomba know to dock?
When the battery power gets low, the vacuum starts looking for the infrared signal emitted by the charger. Once it finds it, Roomba follows the signal and docks itself to the charger. … When it picks up a signal from a virtual wall, it knows to turn around and head the other way.
Why does my Roomba not dock?
First and foremost, take your Roomba away from its charging base. Next, turn it over in order to remove the caster wheels – make sure there’s no dirt in the caster wheels or the robot cannot approach the charging contacts. As soon as you find your Roomba unit won’t dock, quickly check the caster wheel.
How does Roomba know where home base is?
The Home Base emits infrared signals. Specifically, it emits three distinct signals: left, right, and halo. The Roomba detects these infrared signals with the raised sensor (RCON turret) at its front, as well as sensors integrated into its front bumper.
Why wont my Roomba leave the dock?
Re: Roomba won’t leave the dock
There may be mechanical interference preventing the Roomba from leaving the base. Check the charging contacts on both the underside of the Roomba and the top of the homebase.