Frequent question: How do I reset the Litter Robot?

Can you reset litter robot from app?

Open your app. Go to “Remote” and click “Delete my Litter-Robot.” … Reset your Litter-Robot by unplugging it from the base while the unit is powered on. Wait 15 seconds, plug it back in, and allow it to cycle until the blue “Ready” status lights up.

How do I reset my Litter Robot 2?

Make sure that the green light on the Litter-Robot Control Panel is on (“OK/Waiting”). 3. If the red light is on (“Sensor/Timing”), push any of the buttons (Cycle, Fill, or Empty). This resets the unit and the green light should come on (“OK/Waiting”).

How do you reset a cat’s sensor?

To reset the Cat Sensor, press Reset when the unit is at the Home position and the control panel displays a solid blue light. Press the Reset button firmly and quickly, then watch for the blue light to flash to confirm you have successfully reset the Cat Sensor.

How do you Unpause a litter robot?

Repeat Press & Hold to unlock. Pauses the unit during cycling or will reset Cat Sensor baseline when pushed at home position while Blue LED is illumiated (Recommended after adding litter). When paused, repeat Press & Release to resume cycle.

THIS IS INTERESTING:  Is Darlene real Mr Robot?

Where is the Litter-Robot Sensor?

The Litter-Robot is equipped with infrared emitters and sensors located above the Waste Drawer that check if the drawer is full each time the Globe returns to the Home position.

What does the empty button do on Litter Robot?

Empty Button + [Wait Time Setting]

Press and Release: Empties all litter from Globe into the Waste Drawer. Press any button to return the Globe to home position. Press and Hold: Holding the Empty button will enter Wait Time Setting mode indicated by one of the LEDs flashing.

What is blue light inside Litter Robot?

The automatic night light, located in the upper bonnet, is there to help guide your cat to the litter box.

How long is litter robot warranty?

The Litter-Robot is backed by an 18-Month Full Warranty and you have the option to extend it for another 18 months for three years of coverage. During the warranty period, AutoPets will repair your Litter-Robot (and even cover shipping costs within the continental United States).

What is a cat sensor fault Litter Robot?

Sometimes after adding litter or replacing litter in the globe, the total weight of the globe becomes high enough that during the rotation or even while stationary (without cat inside) the cat sensor is triggered. If the Cat Sensor is triggered continuously for more than 2 minutes then the red light starts to blink.

How do you fix a faulty CAT sensor?

Adjust your cat sensor by pressing the Reset button. Test CATS by pressing on the globe just above the entrance in a forward and downward motion.

HARD RESET

  1. Hold the Cycle button for 5 seconds. …
  2. Hold the Cycle button for 5 seconds. …
  3. Press the Reset button to clear this status and proceed to troubleshoot.
THIS IS INTERESTING:  You asked: What is creativity in artificial intelligence?
Categories AI