Indicator lights will turn off after 60 seconds to conserve energy while Roomba is charging. Check status of the battery by pressing the CLEAN button to illuminate the Battery Indicator. Indicator will appear amber while the battery is charging and solid green when fully charged.
Does Roomba light stay on while charging?
Different models of Roomba vacuums display different lights while charging. The 900, 800, and 700 series Roombas display light for the first 60 seconds of the charging cycle. The 600 and 500 series have a blinking light once every four seconds to indicate the unit is charging.
How do I know if my Roomba battery is bad?
The power light on a fully charged Roomba will come on in a green solid color. On the other hand, when the battery is charging you will notice a pulsing amber color. Additionally, the light will be flashing red when the battery is too low and solid red when completely drained.
What do I do if my Roomba isn’t charging?
If your Roomba is not charging, clean the charging ports with a soft cloth and some rubbing alcohol to remove dust, hair, or gunk accumulation. You may also have to reinstall or replace your battery or charging dock or even reset the Roomba to factory settings.
How do I check my Roomba battery?
If you want to see the current battery status of your Roomba, simply press the Clean button once. After the light is on for a few seconds, it will return to the charging display mode as usual. This applies to all Roomba models.
The flashing orange light means it senses that the battery has been discharged and when docked it is recharging. Do not interrupt the cycle of charging the orange blinking light will cease and the unit should operate normally once charging is complete.
How do I revive my Roomba battery?
Perform a manual reconditioning every few months. Remove the battery and hold down the power button on the Roomba for five to 15 seconds. This resets the Roomba.
If the power light blinks green, the batteries will soon need replacement.
How do I reset my Roomba battery?
How to reset the Roomba battery?
- Press the CLEAN button to turn on the Roomba.
- Hit the SPOT and DOCK buttons simultaneously for 10 seconds.
- Release both buttons at the same time as soon as you hear the typical beep sound.
- Stop loading the robot for at least 12 hours and then try it.
What does red light mean on Roomba?
Light Ring While Idle
Pulsing red: Charging, too low to start cleaning. Solid red: Error (tap Clean for details). Red sweep toward rear: Empty the bin.
What does the blue light on the Roomba mean?
c) A solid blue magnifying glass means that Roomba is in intensive clean mode. … The machine does not stop cleaning when the bin is full, so you may want to clean again if you find it with a full bin, as it is obviously not very efficient in this condition.