How do I change the Wi-Fi on my Roomba?
Android: To set up Roomba® on a different network with an Android device, press “Change Wi-Fi network” and choose the network you would like to connect to from the menu.
How do I reset my Roomba Internet?
Press and hold HOME and SPOT Clean buttons on your robot for 10 seconds. When the button is released, Roomba will play the reboot tone. Wi-Fi connected Roomba 800 series. The reboot procedure is the same for Roomba 500 & 600 series, and also Wi-Fi connected Roomba 600 & 800 series.
Why won’t my Roomba connect to my Wi-Fi?
If your robot cannot be found in the network, reboot the robot and router, force close the iRobot HOME App, and retry the Wi-Fi setup process. If the problem persists, check your Wi-Fi settings on your router to confirm they are compatible with the Wi-Fi setup process.
How do I activate Roomba Wi-Fi?
On the Roomba itself, tap and hold the buttons with the target icon and the home icon until the Roomba makes a tone. Your vacuum will take a moment to connect to your Wi-Fi network. Once it’s done, you should see a screen like the one on the right.
Is my Roomba WiFi enabled?
Not all Roomba models are WiFi connected so make sure you have the right model before you attempt this process. The WiFi connected models are; Roomba 690, Roomba 890, Roomba 960 and Roomba 980. You can also check your product manual for information on whether it can be connected to WiFi.
How do I reprogram my Roomba?
Press and hold the Home, Spot Clean, and Clean buttons simultaneously. Then, wait for the light ring around the Clean button to begin swirling. Once there’s a light ring, let go of the three buttons. Now, the Roomba will restart, signaling the end of the factory reset process.
What is Error 15 on Roomba?
Roomba says “Error 15. Press CLEAN to restart.” Overview. Roomba is experiencing an internal communication error. that stinks Press CLEAN to restart the cleaning mission.
What is Error 14 on Roomba?
Error 14 on your Roomba means that the dust collector bin needs to be reinstalled. If the bin was installed correctly, clean the Roomba of dust and grime, or try restarting or resetting the robot.
Why is my Roomba not working?
The most common problem indicated by Roomba owners is its battery. … Some people advise resetting and cycling the unit, which is done by removing the battery, press down the clean button for 5 to 15 seconds, restore the battery, and charging the Roomba until the power indicator light becomes green again.
Flashing red indicates a problem with battery charging. Either the charger is bad, or the charging circuit in your Roomba is bad.
How do I add a second Roomba?
Open the iRobot HOME App, create or sign-in to your account, and then select “Add a Robot”. This robot is added by selecting “Add a Robot”, and then “Roomba”, followed by “Roomba Combo”.