What does charging error 2 mean on Roomba?

The Roomba says “Error 2: Open Roomba’s brush cage and clean brushes.” If you are getting this error, the most likely culprit is hair stuck on the brushes. It may be that you are not cleaning the brushes of your Roomba often enough, and hair is preventing the brushes from spinning properly.

How do I fix error 2 on Roomba?

Roomba® 900 series says “Error two (2). Clear Roomba’s debris extractors, then press CLEAN to restart.” Roomba® 800 series says “Error two (2). Open Roomba’s extractor frame and clean extractors.”

How do I fix Roomba charging error?

To reset the battery on your 500 or 600 series Roombas:

  1. Press the Clean button in the Roomba.
  2. Press and hold the Spot and Dock buttons for at least 10 seconds.
  3. Release the buttons when you hear a beep from the Roomba.
  4. Leave your Roomba on the charging dock for at least 12 hours or until the Clean button turns green.
THIS IS INTERESTING:  Can you watch Mr robot on YouTube TV?

What is charging error 2 on Roomba?

Charging Error 2: Charging Error

This error message indicates the battery on your Roomba cleaner is unable to charge. If you have a Roomba 900 series, you will hear the following audio message “Charging error two (2)”. The 500, 600, 700, and 800 series models also display the same error message.

Why is my Roomba battery not charging?

When your Roomba won’t charge, there are two common situations – making sure either the Home Base has power or no dust on the charging contacts. Sometimes using the wrong kind of battery as well as having issues with the power source can also make your robot not turn on or charge.

How do I reset my Roomba battery?

How to reset the Roomba battery?

  1. Press the CLEAN button to turn on the Roomba.
  2. Hit the SPOT and DOCK buttons simultaneously for 10 seconds.
  3. Release both buttons at the same time as soon as you hear the typical beep sound.
  4. Stop loading the robot for at least 12 hours and then try it.

How do I know if my Roomba battery is bad?

The power light on a fully charged Roomba will come on in a green solid color. On the other hand, when the battery is charging you will notice a pulsing amber color. Additionally, the light will be flashing red when the battery is too low and solid red when completely drained.

What are the Roomba error codes?


Roomba beeps “uh-oh” and says… Likely Cause What To Check
“Error one (1). Move Roomba to a new location then press CLEAN to restart.” Roomba is stuck with a wheel hanging down or Roomba is stuck. Side Wheels
“Error two (2). Open Roomba’s extractor frame and clean extractors.” The extractors cannot turn. Extractors
THIS IS INTERESTING:  Is MS in robotics good?

Why does my Roomba keep beeping while charging?

As your iRobot is continuously making this tune, even whilst charging, this would suggest that either: the battery is not taking on any charge (i.e. it is dead), or; the charging circuitry (within the iRobot) is not detecting the charge current, and assumes that it is not plugged in.

How can I tell if my Roomba is charging?

Charge Roomba using the Home Base. Indicator lights will turn off after 60 seconds to conserve energy while Roomba is charging. Check status of the battery by pressing the CLEAN button to illuminate the Battery Indicator. Indicator will appear amber while the battery is charging and solid green when fully charged.

Why does my Roomba keeps stopping?

A iRobot Roomba will keep stopping because of one of two things: the iRobot Roomba is stuck and cannot move, or something is stuck inside the main brush roller. Once you clean the cylinder brush thoroughly, an iRobot Roomba should work normally.

How long do roombas last?

You’ve probably seen Roomba commercials on TV or the internet, and you’ve also likely seen how expensive some models are. But do they last long? A Roomba vacuum clean can last you between 2 to 6 years.

What does charging error 1 mean on Roomba?

Charging error one (1) means the battery is not detected. The robot will not charge. Please check the following: Check that you are using an authentic iRobot® Lithium Ion Battery. Charging errors can occur with counterfeit batteries.

What does the blue light on the Roomba mean?

c) A solid blue magnifying glass means that Roomba is in intensive clean mode. … The machine does not stop cleaning when the bin is full, so you may want to clean again if you find it with a full bin, as it is obviously not very efficient in this condition.

THIS IS INTERESTING:  Will neurosurgeons be replaced by robots?

Why is my Roomba blinking orange?

The flashing orange light means it senses that the battery has been discharged and when docked it is recharging. Do not interrupt the cycle of charging the orange blinking light will cease and the unit should operate normally once charging is complete.

Categories AI