If the Clean RED or Max light is flashing, it means that the robot may be stuck on an obstacle or the front bumper may be jammed. … If light continues to flash, try to remove the front caster wheel and clean the wheel housing.
How do I know if my shark Ion needs a new battery?
The blue lights indicate how much charge is remaining. If the red “Replace” light is on, then the battery needs to be replaced.
How do I reset my shark ion robot?
Turn your machine upside down and find the power switch. Press it for 10 seconds, which triggers the factory reset process. Wait a few seconds before turning your Shark ION robot again.
when you place the vacuum into the charger – the light blinks so let you know that it is charging. … when you place the vacuum into the charger – the light blinks so let you know that it is charging.
Why is my Shark battery flashing?
If the lights are flashing at the same time, it’s a battery-related problem. Allow the battery to cool down completely since it’s possible for batteries to overheat. Once the battery has completely cooled, let it fully recharge. Test out the battery once it’s fully charged.
How do I know my Shark battery is charging?
When the handheld vacuum is charging, the red indicator light will fade in and out. When the vacuum is fully charged, the indicator light will turn green for 5 seconds, then shut off.
To reset the shark vacuum, put the Power button on the On-Off position and keep the vacuum unplugged. If necessary, clear the hose. Plug the vacuum in again after it cools completely.
What is wrong with my Shark vacuum?
Check for a clogged hose or filter; unclog the hose and replace the filter. Wait 45 minutes for the vacuum to cool; then plug in the vacuum. Turn the power switch to the “I-On” position to start the vacuum. If the vacuum still does not start, contact Customer Service at 1-800-798-7398.
Why is my Shark Cordless not working?
Empty the dust cup container if the vacuum will not pick up, the suction is weak or dust starts to escape from the vacuum. Also, remove the dust cup filter and check for objects in it. Rinse it under water to remove dirt and dust. … If the vacuum still does not work properly, order a replacement filter from Shark.
Why is the red light flashing on my VAX Hoover?
The brushbar may not be switched on, please check the brushbar on/off switch. If the vacuum cleaner is not reclined the brushbar will automatically switch off. If the red light is flashing the brushbar may be jammed. Clear any blockages for further help go to page 11.
If the battery charger is flashing red, remove the battery from the charger. The red flashing light means an error has occurred with the charger. Unplug the charger from the receptacle and wait 30 seconds. … Essentially you are resetting the charger by unplugging it.