Why is the ready light blinking on my Litter Robot?

You’ll most commonly notice a flashing or blinking blue light on your Litter-Robot control panel. This blue light is called the Drawer Full Indicator, which means that the waste drawer is full (or approaching full) and needs to be emptied.

Why is the orange and blue light on on my Litter-Robot?

Both the yellow and blue lights will be on during the next 8 hours, indicating the unit is in 8-Hour Sleep Mode. When the 8-hour period has expired, the unit will run a Clean Cycle. Once the Globe has returned to Home position, only the blue light will be on.

How do you fix a yellow flashing light on Litter-Robot?

When the yellow light is flashing once per second, it will mean one of two things: (1) The cycle was interrupted by the cat sensor. If the cat sensor is activated while the unit is cycling, it will stop. Fifteen seconds after your cat has left the globe, the unit will resume cycling. (2) The bonnet has been removed.

THIS IS INTERESTING:  How Robotics changed manufacturing technology in healthcare?

How do I reset my Litter-Robot?

HARD RESET

  1. Hold the Cycle button for 5 seconds. Both blue AND yellow lights are now on.
  2. Hold the Cycle button for 5 seconds. Yellow light turns off, blue light remains lit.
  3. Press the Reset button to clear this status and proceed to troubleshoot.

Why does my Litter-Robot keep saying its full when its not?

Debris may cause the DFI to indicate a full drawer regardless of the waste in the drawer. Once you are done cleaning your unit, let it dry fully and then reassemble it.

How do you fix a blinking blue light on Litter-Robot?

If the unit continues blinking blue, remove the waste drawer and press cycle. Press reset 2x to abort the cycle and return the unit to home (it will level the litter). If the unit goes to solid blue with the waste drawer removed, ensure there is nothing in the drawer blocking the lenses.

Where is the Litter-Robot sensor?

The Litter-Robot is equipped with infrared emitters and sensors located above the Waste Drawer that check if the drawer is full each time the Globe returns to the Home position.

How long is Litter-Robot warranty?

The Litter-Robot is backed by an 18-Month Full Warranty and you have the option to extend it for another 18 months for three years of coverage. During the warranty period, AutoPets will repair your Litter-Robot (and even cover shipping costs within the continental United States).

What does cat sensor fault mean on Litter-Robot?

Sometimes after adding litter or replacing litter in the globe, the total weight of the globe becomes high enough that during the rotation or even while stationary (without cat inside) the cat sensor is triggered. If the Cat Sensor is triggered continuously for more than 2 minutes then the red light starts to blink.

THIS IS INTERESTING:  What is the difference between Mijia and Roborock?

How do I turn off Litter-Robot light?

To turn the Night Light function off, press and hold the Power button for about 5 seconds. The Night Light will come on, then turn off.

How do I get the litter-robot back online?

Information

  1. Open the app and delete the current unit, even if it is offline. …
  2. Force close (swipe away) the Litter-Robot app.
  3. Unplug the Litter-Robot from the back of the unit for at least 1 minute.
  4. Plug the unit back in and allow to cycle fully.
  5. Once the unit has reached a solid blue light ready status, open the app.

Can you reset litter-robot from app?

Open your app. Go to “Remote” and click “Delete my Litter-Robot.” … Reset your Litter-Robot by unplugging it from the base while the unit is powered on. Wait 15 seconds, plug it back in, and allow it to cycle until the blue “Ready” status lights up.

How often do you change Litter-Robot filter?

We recommend that you change the carbon filters every three to four months depending on how frequently your Litter-Robot gets used. This is really up to personal preference. If you are noticing a stronger odor coming from the unit, it may be time to change the carbon filter.

What is cat sensor timing on Litter-Robot?

The Litter-Robot relies on the Cat Sensor to know when your cat is inside and when it’s time to clean up. The Cat Sensor is a weight-sensitive switch that measures the weight of the unit, so it can tell when there’s a change and what that change means.

THIS IS INTERESTING:  What is a 4 DOF robotic arm?

How often should I clean my Litter-Robot?

We recommend emptying and cleaning the inside of the globe every one to three months. Learn how to clean your Litter-Robot: 1. Press the Empty button to cycle the globe clockwise, which will allow the litter to fall through the waste port and into the drawer for easy disposal.

Categories AI