Frequent question: What does error 8 mean on iRobot Roomba?

Charging error eight (8) indicates the battery is not charging. Check that you are using an authentic iRobot® battery. Charging errors can occur with counterfeit batteries. Ensure that Roomba® is being charged at room temperature.

How do I fix Roomba error 8?

Roomba error code 8 indicates that the motor and filter on your Roomba have stopped working. To fix error code 8, empty the bin and unclog the filter to get it working again.

What are the Roomba error codes?


Roomba beeps “uh-oh” and says… Likely Cause What To Check
“Error one (1). Move Roomba to a new location then press CLEAN to restart.” Roomba is stuck with a wheel hanging down or Roomba is stuck. Side Wheels
“Error two (2). Open Roomba’s extractor frame and clean extractors.” The extractors cannot turn. Extractors

How do I reset my Roomba error?

Press and hold HOME and SPOT Clean buttons on your robot for 10 seconds. When the button is released, Roomba will play the reboot tone. Wi-Fi connected Roomba 800 series. The reboot procedure is the same for Roomba 500 & 600 series, and also Wi-Fi connected Roomba 600 & 800 series.

THIS IS INTERESTING:  Quick Answer: Are robot teachers a good idea?

How do I fix Roomba charging error?

To reset the battery on your 500 or 600 series Roombas:

  1. Press the Clean button in the Roomba.
  2. Press and hold the Spot and Dock buttons for at least 10 seconds.
  3. Release the buttons when you hear a beep from the Roomba.
  4. Leave your Roomba on the charging dock for at least 12 hours or until the Clean button turns green.

Why does Roomba say error?

The Roomba says “Error 2: Open Roomba’s brush cage and clean brushes.” If you are getting this error, the most likely culprit is hair stuck on the brushes. It may be that you are not cleaning the brushes of your Roomba often enough, and hair is preventing the brushes from spinning properly.

Why is my Roomba not vacuuming?

What is this? A Roomba not picking up comes down to not cleaning the brushes and filter at least once per week (twice if you have pets) or replacing them after a certain period of time. iRobot recommends replacing the filter every 2 months and the brushes every 6 to 12 months.

What does Roomba error 5 mean?

Charging Error 5 means your robot’s charging system isn’t working correctly. … If found, use a clean dry cloth to remove debris from the charging contacts. 4. Reinstall the battery and replace the bottom cover and battery door, and then place Roomba back on the Home Base® to try charging again.

Why is my Roomba flashing orange?

The flashing orange light means it senses that the battery has been discharged and when docked it is recharging. Do not interrupt the cycle of charging the orange blinking light will cease and the unit should operate normally once charging is complete.

THIS IS INTERESTING:  Can I wash Roborock s5 filter?

How do I reset my robot vacuum?

Factory reset through the iRobot® HOME App (recommended)

  1. Open the iRobot® HOME App and ensure your mobile device is connected to the same Wi-Fi network as your Wi-Fi connected Roomba®.
  2. Press Settings ➔ Remove/Factory Reset (robot name).

What does Error 11 mean on Roomba?

Error eleven (11) means the vacuum in the bin is not functioning properly. You may need a replacement AeroForce™ bin. Please visit the iRobot Store, use an authorized retailer, or contact iRobot Customer Care to place your order..

Why does my Roomba keep beeping while charging?

As your iRobot is continuously making this tune, even whilst charging, this would suggest that either: the battery is not taking on any charge (i.e. it is dead), or; the charging circuitry (within the iRobot) is not detecting the charge current, and assumes that it is not plugged in.

Does Roomba light stay on when charging?

The 900, 800, and 700 series Roombas display light for the first 60 seconds of the charging cycle. The 600 and 500 series have a blinking light once every four seconds to indicate the unit is charging. The i3 has no light during charging while the i7 series does have a charging light.

What does charging error 3 mean on Roomba?

Thanks. AudioVOX September 14, 2018, 4:58pm #3. Please verify that the charging contacts are clean before you insert the battery. Do you hear a sound when the battery is inserted in the robot. This sound indicates that the battery is well connected.

THIS IS INTERESTING:  Does NASA make robots?